· The phase currents can be adjusted one by one.
· Currents, phase angles(symmetric,asymmetric) and frequencies can be easily identified via the display.
· Its total weight is less than 5 kg.
· With the RS232 interface, the source has the possibility of remote access.

·The PPS 3.3 genX is a powerful and portable threephase current and voltage source. All test values are generated absolutely synthetically with a high degree of accuracy and stability.

Advantages of the PPS 3.3 genX
·Three-phase portable precision type source with single-phase mains supply.
·Current and voltage source facilities can be selected independently.
·Large 9” (800 x 480 pixels) TFT touch screen colour display with graphical user interface.
·Indication of load values, vector diagram and waveform.
·Current, voltage and phase shift are adjustable to high accuracy individual per phase.
·The values set are stabilised by digital and analogue control.
·Generation of harmonics (up to 31st).
·Generation of ripple control signals
·Data transfer and communication via USB (Type B), ETHERNET or WLAN
·Built in web server for remote display of graphical user interface and remote control of the unit.
·Data storage on removable SD memory card.
·Two USB (type A) connectors for connection of peripherals like mouse, keyboard.

·It is a three-phase current and voltage source with a single-phase mains supply.
·Current and voltage sources can be selected and adjusted independently of each other.
·Current, voltage and phase angles can be adjusted with high precision.
·The set values can be seen on the device screen and can also be read remotely via the RS 232 C interface.
·The set values are balanced by digital and analog control.
·31. It can be loaded harmonic up to harmonic.
·The Portable Control Module PCS 400.3 can be independently, and the power supply is controlled by bluetooth in this application.
Options
·CALegration software is used in the Windows application.

Characteristic features:
·Wide measuring December and precision.
·Portable 3 phase meter tester.

Advantages
·It is a sensitive test system for AC values and all measurement modes.
·Current and voltage December: 1 mA....120 A / 0.04 V.....480 V /45 Hz....66 Hz.
·6 current inputs allow both primary and secondary currents to be measured simultaneously in measurement systems connected to AT.
·Replaceable memory card for measurement results and customer information.
·Integrated RS 232 communication interface for data transfer to PC or program control with an external PC and written output feature.

Functions
·Active, visible power and energy measurement.
·Error measurement of 3 inputs at the same time.
·Load measurement and ratio testing of current and voltage transformers.
·Vector diagram display for analysis of basic conditions.

Advantages

·The CheckMeter 2.1 Portable Working Standard is a single-phase portable electronic meter test unit of accuracy class 0.2%, used for testing single phase electricity meters on site.
·Precision test equipment for AC values in the 45 Hz to 66 Hz frequency range.
·Wide measuring range with auto ranging.
·Easy detection of circuit connection faults.
·Data memory for test results and customer data.
·Small dimensions and light in weight.
·Serial interface (RS 232) for data transfer.

Functions
·Active, reactive and apparent energy measurement with inte­grated error calculator.
·Impulse output for energy (galvanic isolated).
·Current and voltage measurements.
·Phase angle measurement.
·Power factor measurement.
·Frequency measurement.

The CheckMeter 2.3 genX Portable Standard Meter is a three-phase portable electronic meter test unit of accuracy class 0.2, used for testing single and three-phase electricity meters on-site. The unit has direct voltage inputs and one UCT Universal Current Transducer input, which can be used with different independent transducers to measure the current with clamp-on CT’s or direct or with high voltage current sensors.The UCT 120.3 set of 3 active error compensated clamp-on CT’s in the range 10 mA …120 A is included in the standard accessories.The CheckMeter 2.3 genX can be upgraded to class 0.1,if the optional UCT I.3-12A input box for direct current connection is used.

Advantages
·Large 7” (800 x 480 pixels) TFT touch screen colour display with graphical user interface.
·Data transfer and communication via USB (Type B) and WLAN.
·Built in web server for remote display of graphical user inter-face and remote control of the unit.
·Data storage on removable SD memory card.
·Independent UCT sets of current transducers allow service, calibration or later purchase of clamp-on CTs or current sen-sors without factory return of the device.