· The phase currents can be adjusted one by one.
· Currents, phase angles(symmetric,asymmetric) and frequencies can be easily identified via the display.
· Its total weight is less than 5 kg.
· With the RS232 interface, the source has the possibility of remote access.

·The PPS 3.3 genX is a powerful and portable threephase current and voltage source. All test values are generated absolutely synthetically with a high degree of accuracy and stability.

Advantages of the PPS 3.3 genX
·Three-phase portable precision type source with single-phase mains supply.
·Current and voltage source facilities can be selected independently.
·Large 9” (800 x 480 pixels) TFT touch screen colour display with graphical user interface.
·Indication of load values, vector diagram and waveform.
·Current, voltage and phase shift are adjustable to high accuracy individual per phase.
·The values set are stabilised by digital and analogue control.
·Generation of harmonics (up to 31st).
·Generation of ripple control signals
·Data transfer and communication via USB (Type B), ETHERNET or WLAN
·Built in web server for remote display of graphical user interface and remote control of the unit.
·Data storage on removable SD memory card.
·Two USB (type A) connectors for connection of peripherals like mouse, keyboard.

·It is a three-phase current and voltage source with a single-phase mains supply.
·Current and voltage sources can be selected and adjusted independently of each other.
·Current, voltage and phase angles can be adjusted with high precision.
·The set values can be seen on the device screen and can also be read remotely via the RS 232 C interface.
·The set values are balanced by digital and analog control.
·31. It can be loaded harmonic up to harmonic.
·The Portable Control Module PCS 400.3 can be independently, and the power supply is controlled by bluetooth in this application.
·CALegration software is used in the Windows application.

Characteristic features:
·Wide measuring December and precision.
·Portable 3 phase meter tester.

·It is a sensitive test system for AC values and all measurement modes.
·Current and voltage December: 1 mA....120 A / 0.04 V.....480 V /45 Hz....66 Hz.
·6 current inputs allow both primary and secondary currents to be measured simultaneously in measurement systems connected to AT.
·Replaceable memory card for measurement results and customer information.
·Integrated RS 232 communication interface for data transfer to PC or program control with an external PC and written output feature.

·Active, visible power and energy measurement.
·Error measurement of 3 inputs at the same time.
·Load measurement and ratio testing of current and voltage transformers.
·Vector diagram display for analysis of basic conditions.


·The CheckMeter 2.1 Portable Working Standard is a single-phase portable electronic meter test unit of accuracy class 0.2%, used for testing single phase electricity meters on site.
·Precision test equipment for AC values in the 45 Hz to 66 Hz frequency range.
·Wide measuring range with auto ranging.
·Easy detection of circuit connection faults.
·Data memory for test results and customer data.
·Small dimensions and light in weight.
·Serial interface (RS 232) for data transfer.

·Active, reactive and apparent energy measurement with inte­grated error calculator.
·Impulse output for energy (galvanic isolated).
·Current and voltage measurements.
·Phase angle measurement.
·Power factor measurement.
·Frequency measurement.

The CheckMeter 2.3 genX Portable Standard Meter is a three-phase portable electronic meter test unit of accuracy class 0.2, used for testing single and three-phase electricity meters on-site. The unit has direct voltage inputs and one UCT Universal Current Transducer input, which can be used with different independent transducers to measure the current with clamp-on CT’s or direct or with high voltage current sensors.The UCT 120.3 set of 3 active error compensated clamp-on CT’s in the range 10 mA …120 A is included in the standard accessories.The CheckMeter 2.3 genX can be upgraded to class 0.1,if the optional UCT I.3-12A input box for direct current connection is used.

·Large 7” (800 x 480 pixels) TFT touch screen colour display with graphical user interface.
·Data transfer and communication via USB (Type B) and WLAN.
·Built in web server for remote display of graphical user inter-face and remote control of the unit.
·Data storage on removable SD memory card.
·Independent UCT sets of current transducers allow service, calibration or later purchase of clamp-on CTs or current sen-sors without factory return of the device.

It is intended for checking and calibration of reference standard power and energy meters, for calibration of precision current and voltage sources and for verification of electrical standard measurements and electricity meter test systems. The unit uses analogue – digital converters (ADCs) for its data acquisition, these being controlled and read by a digital signal processor (DSP).

The comparator may be directly connected to an external computer system over its RS 232 C serial interface. The comparator is distinguished by having very wide measuring ranges for all AC values while still being of accuracy class 0.01%:
Voltage: 30 V … 500 V
Current: 50 mA … 160 A.
In addition low currents from 1 mA are measured. Range selection may be made either manually or automatically. The advanced conception of the K 2006 Comparator
is based on our considerable previous experience of reference standard meters and comparators. The instrument is capable of measuring all principle parameters of a mains frequency network, from 15 to 70 Hz, and harmonics up to 3500 Hz. The basic accuracy of the system is 0.01%. The transfer error of the unit can be verified at any time by using an external DC reference voltage.

·Excellent price / performance ratio.
·Universal unit for many applications.
·One wide range input for each signal: Voltage:30 V – 500 V.
·Current: 1 mA – 160 A.
·High precision and long term stability.
·Can be used with computer system.
·Automatic range switching.
·Analogue – digital data acquisition with 6 x ADCs.
·Verification against D.C. reference voltage.
·Error calculator for test of reference standard meters.
·Harmonics measurement up to 32nd.
·Display of vector diagram or waveform.

K2008 is a three-phase comparator of accuracy class 0.005 (50ppm) with direct voltage and current inputs. It has been designed for universal laboratory and test applications and is intended for checking and the calibration of reference standards for electrical power and energy. In addition, it can be integrated into meter or reference standard test systems of highest accuracy.


  • Wide range voltage input 30 … 520 V (phase – neutral)
  • Wide range current input 1 mA … 160 A
  • DC standard input of 1 VDC / 10 VDC •Large 9” (800 x 480 pixels) TFT touch screen colour dis-play with graphical user interface
  • Data transfer and communication via USB (Type B), ETHERNET or WLAN
  • Data storage on removable SD memory card
  • Two USB (type A) connectors for connection of periph-erals like mouse, keyboard
  • Built in web server for remote display of graphical user interface and remote control of the unit


  • Active, reactive and apparent power / energy measurement for three phase, 3- or 4-wire systems with inte-grated error calculator with 3 pulse inputs for testing of reference standards
  • 3-phase electrical measurements, vectorial analysis, harmonic and waveform display
  • 3 programmable pulse outputs (one electrical and optical) for calibration and integration in test systems
  • Synchronisation inputs for sample frequency and signal period
  • Verification against DC standards and frequency standards

The PRS 600.3 is a combination of a three-phase Portable Reference Standard of class 0.02% and an IEC 61000-4-30 Class A compatible Power Quality Analyzer with 3 voltage and 3 current
channels. The device is equipped with two 8.4” colors TFT displays based on touch screen operation. The Reference Standard is used to test single and three phase meters, instrument transformers and
installations on site. The Power Quality Analyzer is used as reference for PQ test systems, to resolve disputes at contractual applications, for statistical surveys, including EN 50160 reporting, and for online troubleshooting of different kind of power quality problems. The unit can be used with various types of clamp-on CTs and current and voltage sensors. Therefore, it is possible to easily and accurately
test both CT/PT and direct connected meters.

·Meter testing of pulse outputs (LED/disc mark/S0) and registers of active, reactive, apparent 1- or 3-phase, 3- or 4-wire energy meters with 3 pulse inputs and 3 pulse outputs.
·Measurement of electrical parameters (UI , PQS, f, PF) including vector diagram, harmonic analysis and wave form display.
·Instrument transformer testing (CT/PT burden, CT/PT ratio).
In accordance with IEC 61000-4-30 Class A, IEC 62586-2, certified by ISO/IEC 17025 accredited laboratory NMi Certin B.
·Dips / Swells / Interruptions
·Harmonics / Interharmonics / Signal voltages
·Under- and Overdeviation
·Rapid Voltage Changes RVC
·Transient capture  100s (26.7 kHz)